Labs
v1.0 - Initial CCNA Wireless study topology
Introduction This is the initial version of the network topology, specially crafted for testing ...
Cisco 5500 WLC - Cisco WLAN Express Setup
1. Connected the WLC to the PC via console. Entered the bootloader and selected option 4: 2. C...
Lab 1-1: Initial Configuration of the Network Devices
Topology Task 1: Define the Addressing Plan and Assignments Before beginning with the confi...
Lab 1-2: Configure the Management Server
TopologyTask 1: Cable the Management Server to JRI.EDGEThe Management Server will be given a fixe...
Lab 2-1: WLC Basic Setup and Management Interface
Topology Task 1: JRI.WLC.01 Bootup, Factory Reset First task is to bring the JRI.WLC.01 550...
Lab 2-2: Management of Controllers (5508)
TopologyTask 1: Using the Controller InterfaceUsing the Controller GUIA browser-based GUI is buil...
Lab 3-1: Join Process - Configure and Register Lightweight APs
Topology Task 1: CAPWAP Exploration Cisco lightweight access points use the IETF standard C...
Lab 4-1: Adding a Second WLC to the Lab (CLI Configuration Wizard Method)
Topology Task 1: JRI.WLC.02 Bootup, Factory Reset We have already setup the JRI.WLC.01 (whi...
Lab 4-2: Configuring Link Aggregation (LAG) on the WLC
Topology Task 1: Explain Link Aggregation Link aggregation (LAG) is a partial implementatio...
Lab 4-3: Updating the WLC Image and AP Bundle (GUI method)
Topology Task 1: The Need for Upgrading JRI.WLC.02 This page will show the upgrade process ...
Lab 4-4: Joining APs to JRI.WLC.02
Topology Task 1: Modifying DHCP Server Option 43 at JRI.EDGE This lab is just to verify tha...
Lab 4-5: Configuring Backup Controllers and Redundacy (N+1 and N+N)
Topology Task 1: APs WLC selection Once an AP has finished the discovery process, it should...
Lab 4-6: Configuring SSO Redundancy
Topology Task 1: Introduction to HA SSO This guide provides information on the theory of op...
Lab 6-1: Configuring 802.11 Support and Data Rates
Topology Task 1: Configuring 802.11 Support Cisco WLCs and most APs can support WLANs in bo...
Lab 6-2: Configuring Radio Resource Managament (RRM)
Topology Task 1: Information about Radio Resource Management The Radio Resource Management ...
Lab 7-1: Configuring a WLAN
Topology Task 0: Cleaning MADRID_USERS First, I will begin cleaning up the existing WLAN ...
Lab 7-2: Configuring WLAN Security
Lab 7-3: Guest WLAN Configuration
Topology Task 1: Prepare the Wired Infrastructure (JRI.EDGE) Before touching the WLC, I'll ...
Lab 8-1: CleanAir and ED-RRM
Topology Task 0: Prerequisites for CleanAir You can configure Cisco CleanAir only on Cl...
Lab 9-1: Cisco Prime Infrastructure
Topology Task 1: Downloading Cisco Prime Infrastructure 3.10 As of may 2026, the latest and...