CCNA Wireless
Focuses on designing, configuring, and troubleshooting Cisco wireless LANs and mobility solutions.
RF and Antennas
WLAN Topologies
802.11 Frame Types
Planning Coverage with Wireless APs
Implementing Cisco Wireless Architectures
Wireless Security
Client Connectivity Troubleshooting
Labs
v1.0 - Initial CCNA Wireless study topology
Introduction This is the initial version of the network topology, specially crafted for testing ...
Cisco 5500 WLC - Cisco WLAN Express Setup
1. Connected the WLC to the PC via console. Entered the bootloader and selected option 4: 2. C...
Lab 1-1: Initial Configuration of the Network Devices
Topology Task 1: Define the Addressing Plan and Assignments Before beginning with the confi...
Lab 1-2: Configure the Management Server
TopologyTask 1: Cable the Management Server to JRI.EDGEThe Management Server will be given a fixe...
Lab 2-1: WLC Basic Setup and Management Interface
Topology Task 1: JRI.WLC.01 Bootup, Factory Reset First task is to bring the JRI.WLC.01 550...
Lab 2-2: Management of Controllers (5508)
TopologyTask 1: Using the Controller InterfaceUsing the Controller GUIA browser-based GUI is buil...
Lab 3-1: Join Process - Configure and Register Lightweight APs
Topology Task 1: CAPWAP Exploration Cisco lightweight access points use the IETF standard C...
Lab 4-1: Adding a Second WLC to the Lab (CLI Configuration Wizard Method)
Topology Task 1: JRI.WLC.02 Bootup, Factory Reset We have already setup the JRI.WLC.01 (whi...
Lab 4-2: Configuring Link Aggregation (LAG) on the WLC
Topology Task 1: Explain Link Aggregation Link aggregation (LAG) is a partial implementatio...
Lab 4-3: Updating the WLC Image and AP Bundle (GUI method)
Topology Task 1: The Need for Upgrading JRI.WLC.02 This page will show the upgrade process ...
Lab 4-4: Joining APs to JRI.WLC.02
Topology Task 1: Modifying DHCP Server Option 43 at JRI.EDGE This lab is just to verify tha...
Lab 4-5: Configuring Backup Controllers and Redundacy (N+1 and N+N)
Topology Task 1: APs WLC selection Once an AP has finished the discovery process, it should...
Lab 4-6: Configuring SSO Redundancy
Topology Task 1: Introduction to HA SSO This guide provides information on the theory of op...
Lab 6-1: Configuring 802.11 Support and Data Rates
Topology Task 1: Configuring 802.11 Support Cisco WLCs and most APs can support WLANs in bo...
Lab 6-2: Configuring Radio Resource Managament (RRM)
Topology Task 1: Information about Radio Resource Management The Radio Resource Management ...
Lab 7-1: Configuring a WLAN
Topology Task 0: Cleaning MADRID_USERS First, I will begin cleaning up the existing WLAN ...
Lab 7-2: Configuring WLAN Security
Lab 7-3: Guest WLAN Configuration
Topology Task 1: Prepare the Wired Infrastructure (JRI.EDGE) Before touching the WLC, I'll ...
Lab 8-1: CleanAir and ED-RRM
Topology Task 0: Prerequisites for CleanAir You can configure Cisco CleanAir only on Cl...
Lab 9-1: Cisco Prime Infrastructure
Topology Task 1: Downloading Cisco Prime Infrastructure 3.10 As of may 2026, the latest and...