Recently Updated Pages
How to access Movistar/O2 HGU GUI from pfSense
Introduction Beginning with the following topology: With the Movistar HGU router configured i...
Reverse telnet theory + practical example
When a user telnets to a router, he is “logged on” directly to the router. Cisco adds a special t...
Using a dial-up modem on Windows 98
Introduction This is a follow-up article to installing a US Robotics 56K Faxmodem on Windows 98....
Advanced US Robotics 56K modem configuration via AT commands
Introduction The Hayes command set (also known as the AT command set) is a specific command lang...
OSPF lab
The goal is to investigate OSPF and its core features in preparation for the CCNA exam. The top...
Catalyst 9300 Series - Upgrade Process
ROMMON ROMMON, also known as the boot loader, is firmware that runs when the device is powered u...
Deploy the 2500 Series Wireless Controller
Introduction The Cisco 2500 Series Wireless Controller supports a maximum of 50 lightweight APs ...
Reset WLC 2504 to factory defaults
Via recover-config command Connect a console cable to a workstation Power on the WLC Wait un...
Information Reference
Getting Started Guide - Cisco Unified Communications 500 Serieshttps://community.cisco.com/legacy...
Information Reference
Configuration Files for Phoneshttps://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/con...
Information Reference
Cisco ASA 5500-X Series Firewallshttps://www.cisco.com/c/en/us/support/security/asa-5500-series-n...
Information Reference
https://www.cisco.com/c/en/us/support/routers/1000-series-integrated-services-routers-isr/series....
Information Reference
https://www.cisco.com/web/ANZ/cpp/refguide/hview/router/2800.html#cisco2821 https://www.cisco.co...
Information Reference
Cisco Aironet Series 2800/3800 Access Point Deployment Guidehttps://www.cisco.com/c/en/us/td/docs...
Information Reference
Cisco 5500 Series Wireless Controllershttps://www.cisco.com/c/en/us/support/wireless/5500-series-...
Proxmox VE 9.0 - Introduction
Introduction Proxmox Virtual Environment (VE) is a platform to run virtual machines and cont...
Topton X2E mini PC - Hardware Review
Introduction The Topton X2E (Intel N150 variant) is a compact, fanless mini PC designed prim...
Proxmox VE 9.0 - Installation
Proxmox VE is based on Debian. The installer will guide you through the setup, allowing you to ...
Information Reference
How to set the config-register on a 2960https://community.cisco.com/t5/routing/how-to-set-the-con...
Converting a Cisco Lightweight Access Point Back to Autonomous Mode
Introduction The AP used in this lab is a Cisco Aironet 1700i Series AP, an AIR-CAP1702I-E-K9. ...