Wireless
Reset Cisco Aironet 1700 Series LAP to factory defaults
Introduction For this lab I have the following AP model: AIR-CAP1702I-E-K9. This is an AP I boug...
Configuring an autonomous Cisco 1700 Series AP via CLI
Introduction We begin where we left off in the article of how to convert a lightweight AP (LAP) ...
Converting a Cisco Lightweight Access Point Back to Autonomous Mode
Introduction The AP used in this lab is a Cisco Aironet 1700i Series AP, an AIR-CAP1702I-E-K9. ...
Reset WLC 2504 to factory defaults
Via recover-config command Connect a console cable to a workstation Power on the WLC Wait un...
Deploy the 2500 Series Wireless Controller
Introduction The Cisco 2500 Series Wireless Controller supports a maximum of 50 lightweight APs ...